Cell power failure ALARMS

Cell power failure

Fault ID and name 4090:	EFaultId_TxCarrierInputPowerLowA
Used in products	FlexiBTS, LTE
Detecting unit	FSM
Source	LCR
Meaning	Flexi Radio Module has detected low downlink carrier input power from the Flexi System Module.
State	Start
Unit status	Out of order
Unit status attributes
Effect	The cell is disabled
Reported alarms	7653 CELL FAULTY
LED display	None
Instructions	1. Check the other active alarms and act accordingly. 2. If that does not help, block/unblock the system module. 3. FSMr2: If that does not help, replace the system module. FSMr3: If the faulty cell is on the baseband extension module, replace the extension module.
Related faults

Comments

NOKIA FSMF CONFIGURATION RESET

NOKIA BTS CONFIGURATION RESET MANUALLY BUTTON

FSMF & AIRSCALE ASIA,ASIB,ASIK Carry out a configuration reset of the Extension FSMF. To enable the Extension FSMF to operate in this role it will need a configuration reset. The configuration reset deletes any existing configuration data and withdraws the Master System Module role. The process is performed with the Configuration Reset button located on the underside of the EIF1 port of the FSMF: v Reset button is located next to the EIF1 interface. Press reset button for 5 seconds to clear configuration data. Manual reset is required afterwards for changes to take effect. AIRSCALE BTS A ir Scale common plug-in units reset and service buttons The buttons reset the BTS, the configuration, or restart the BTS in a fail safe mode You can use the reset and service buttons on Nokia Air Scale common plug-in units in Case the remote c...

TELECOM SOFTWARE

Search This Blog