Skip to main content

RFS TOOLS

Comments

  1. New RFS tool required for SBTS19B

    ReplyDelete
  2. ok
    but now RFSToolv4_210 available

    ReplyDelete
  3. Is there a newer version of the RFS tool available?

    ReplyDelete
  4. 2.59 version needed to pasing from LTE to WCDMA

    ReplyDelete
    Replies
    1. Is the newer version available for download somewhere? Please post it. Thanks

      Delete
    2. V2.59 available

      Delete
  5. still 2.59 v not available?

    ReplyDelete
  6. I would need the last RFS TOOL Version 2.31. Could you help me? Franciscojosebazan@gmail.com

    ReplyDelete
  7. Hi, by any chance do you have the latest version of the RFS Tool? We have a job of over 800 FSMF to reset and unfortunately the passwords have been changed. The RFS Tool we have is an old version. I do not mind paying for it, if you can provide this for me. Thank you, and I look forward to your response.

    ReplyDelete
  8. Hi I have many unit FSMF module locked. Unit freeze after SW upgrade cannot ping any IP nor LMP is not active. Do anyone have resetting sequence or solutions for this? I don't mind to pay for the service. My email ckean_ng@hotmail.com

    ReplyDelete
  9. Hi, I have some NOKIA ASIB units with problems. I would need the latest version of RFS tool for recovery. Could someone help me? Please send an email franciscojosebazan@gmail.com

    ReplyDelete

Post a Comment

Popular posts from this blog

NOKIA FSMF CONFIGURATION RESET

NOKIA BTS CONFIGURATION RESET MANUALLY BUTTON

  FSMF & AIRSCALE  ASIA,ASIB,ASIK Carry out a configuration reset of the Extension FSMF. To enable the Extension FSMF to operate in this role it will need a configuration reset. The configuration reset deletes any existing configuration data and withdraws the Master System Module role.  The process is performed with the Configuration Reset button located on the underside of the EIF1 port of the FSMF: v    Reset button is located next to the EIF1 interface. Press reset button for 5 seconds to clear configuration data. Manual reset is required afterwards for changes to take effect.                             AIRSCALE BTS A ir Scale common plug-in units reset and service buttons The buttons reset the BTS, the configuration, or restart the BTS in a fail safe mode You can use the reset and service buttons on Nokia Air Scale common plug-in units in Case the remote c...

HOW TO SBTS PPS reference missing ALARM CLEAR...