Posts

Featured post

LTE Network Fundamentals

  LTE Network Fundamentals: Essential Questions and Answers :- Q.1 What is possible range of PCI? ->0-503, PSS(0,1,2) and SSS(0-167) Q.2 What are the Physical Downlink Signals? ->Reference signal and synchronization signals - PSS and SSS Q.3 Difference between RSRP & RSRQ? ->RSRP – avg power across all received RS symbols in measurement bandwidth ->RSRQ-NxRSRP/RSSI ->N- no of RBs of eutra rssi measurement bandwidth Q.4 Repetition period of MIB? ->40ms Q.5 What is modulation scheme used for MIB? ->QPSK Q.6 Which channel carries user data in DL? (Basic) ->PDSCH Q.7 How many OFDM symbols are used for PDCCH? ->1, 2, or 3 as indicated by PCFICH Q.8 Which Physical DL channel carries the Paging channel? ->PDSCH Q.9 S1 Interface ->Enode B - MME - S1C and Enode B - SGW - S1U Q.10 Function of PHICH ->HARQ indication Q.11 Modulation scheme in PHICH? ->BPSK Q.12 What All BW supported in LTE? ->1.4MHz, 3MHz, 5MHz, 10MHz, 15MHz, 20MHz Q.13 What is X2? -&
Post a Comment
Read more

How To Clear Alarm Of TRX Object Allocation Failed In RF Module

Image
Post a Comment
Read more

HOW TO SBTSSRAN ONE OR MORE Trx DID NOT RECEIVE SYSTEM INFORMATION FROM ...

Image
Post a Comment
Read more

HOW TO CHECK DYNAMIC POWER POOLING 2G STANDLONE

Image
Post a Comment
Read more

NOKIA BTS CONFIGURATION MANUALLY RESET BUTTON

Image
Post a Comment
Read more

NOKIA BTS CONFIGURATION RESET MANUALLY BUTTON

Image
  FSMF & AIRSCALE  ASIA,ASIB,ASIK Carry out a configuration reset of the Extension FSMF. To enable the Extension FSMF to operate in this role it will need a configuration reset. The configuration reset deletes any existing configuration data and withdraws the Master System Module role.  The process is performed with the Configuration Reset button located on the underside of the EIF1 port of the FSMF: v    Reset button is located next to the EIF1 interface. Press reset button for 5 seconds to clear configuration data. Manual reset is required afterwards for changes to take effect.                             AIRSCALE BTS A ir Scale common plug-in units reset and service buttons The buttons reset the BTS, the configuration, or restart the BTS in a fail safe mode You can use the reset and service buttons on Nokia Air Scale common plug-in units in Case the remote connection is not possible   The buttons reset the BTS, the configuration, or restart the BTS
Post a Comment
Read more

HOW TO NOKIA SBTS EAC (ALARM) CONFIGURATION

Image
Post a Comment
Read more

HOW Nokia AIRSCALE ASIB CARD SOFTWARE INSTALL PROCEDURE

HOW Nokia AIRSCALE ASIB CARD SOFTWARE INSTALL PROCEDURE
Post a Comment
Read more

Popular posts from this blog

MODULE NAME

Image
           TELECOM SOFTWARE TELECOM SOLUTION NETWORK PROJECT   MODULE NAME v FXJB:- Flexi multi radio 900 MHz revision v FRDJ:- Flexi radio module 900 MHz revision v FXED:- Flexi multi radio 1800 MHz revision v AREA:- Air scale Radio module 1800 MHz version v FRGT:- Flexi radio module 2100 MHz revision v FRGQ:- Flexi single radio module 2100 MHz revision v FRGP:- Flexi radio module 2100 MHz revision v FXEF:- Flexi multi radio 1800 MHz revision v FXEB:- Flexi multi radio 1800 MHz revision v FSMF:- Flexi system module revision v ESMB:- Flexi Edge System module revision v FTIF:- Flexi Transport interfaces revision v FTIB:- Flexi Transport interfaces revision v TDD:- Time-division Duplex v FDD :- Frequency-division Duplex v CRFS:- Classic radio frequency share v IP:- Internet Protocol
Read more